Bacteria Detection in Water

In cooperation with various houses who specialize in biotechnology and water / food testing, we provide you with high-end professional equipment for the Detection of Bacteria in Water, specifically for the detection of coliforms in water like E.coli and others like Pseudomonas Αeruginosa.

Water Tests / Detection of Coliforms in Water

WaterWorks™ Coliform Bacteria Check

Total coliform presence/absence test (P-A) without E.coli confirmation Designed around USEPA standards of testing (1 colony per 100 cc) Simple test method that requires no incubator using safe and non-hazardous chemistry Results in 48 hours (77° F/25° C).

Quick Bacteria Test (15 Minutes)

15 Minute Bacteria Test for water quality testing. Other bacteria tests can take up to 48 hours to produce results, wasting valuable time and money. This easy to use dip and read test strip detects E.coli, species of Salmonella, Shigella, Enterobacter, Klebsiella and many other coliform and non-coliform bacteria. Quick™ Bacteria Test can provide reliable on site results in ONLY 15 minutes, which can be used for pools, spas, drinking water, lakes, rivers and streams. Bacterial contamination should be of great concern for pool and spa owners, operators, or anyone who tests their water quality. Contamination can occur without warning and the safety of customers, families, and friends come first. Quick Bacteria Test detects coliform and non-coliform bacteria at 103 cfu/ml.

WaterWorks™ Free Chlorine Sanitizer Check

These Free Chlorine water quality test strips combine a wide range of detection with our patented Free Chlorine indicator. Designed to resist interference from monochloramines, Free Chlorine is the ideal product when testing in a food processing environment. WaterWorks Free Chlorine is perfect for determining whether or not you have the correct amount of sanitizer present. Sold in packets of 30 test strips, all of the reagents are impregnated on the test strip, and no external chemicals are needed to perform the water quality test.

Total Test Time: 47 seconds
Detection Levels: 0, 1.0, 3.0, 5.0, 10, 12, 15, 20, 40, 80 ppm (mg/L)

SenSafe® Total Chlorine, Bottle of 50

The SenSafe® Total Chlorine Water Check test strip is a TMK (Thio-Michler’s Ketone) Colourimetric Aperture Strip designed around patented technology to meet USEPA guidelines for screening all drinking water sources. The water quality test reports accurate results from 0.02 ppm (mg/L) to 10.0 ppm (mg/L). US Patented SenSafe™ Total Chlorine Water Check makes on-site and field testing quicker and easier than current methods available. Since there are no powders or tablets to mix, no technical training is required, no hazardous chemicals are used, and water quality test results are achieved in less than 1 minute, the SenSafe® Total Chlorine Water Check test strip promise to revolutionize water quality testing.

Total Test Time: 15 Seconds
Detection Levels: 0, 0.05, 0.1, 0.15, 0.2, 0.5, 0.8, 1.0, 4.0, 10.0 ppm (mg/L)

WaterWorks™ pH / Total Alkalinity

pH & Total Alkalinity test is a single test strip that has been designed with two separate test pads: one for pH and the other for Total Alkalinity measurements. This test is an alternative to wet chemical tests since it gives reproducible results for each test separately. Test range is from 6.0 to 9.0 for pH and 0-360 ppm (mg/L) for total alkalinity. Bottle of 50.

pH: 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0
TA: 0, 80, 120, 180, 240, 360 ppm (mg/L)

Colifast ALARM

ETV Verification
Analysis Formats
Colifast ALARM vs CALM (see next product)

The fully automated at-line instrument provides a presence-absence result for coliforms in drinking water. A signal will be given if the system detects one or more coliform bacteria. The Colifast ALARM is verified by EPA ETV program. EPA web page.

Colifast At-Line Monitor (CALM)

EU Project
Analysis Formats
WWI Article

Fully automated at-line system for detection of coliforms. Also available with prefilled vials. Detection time from 8 to 12 hours.

Colifast Field Kit

Technical Note
Field Kit Contents

For detection of coliforms on site. Methods for high level and for presence/absence available. Detection time from 15 minutes.

Please contact our Sales Department (info@geasolutions.gr) for additional information.